Slots
This is the total number of memory upgrade slots (sockets) followed by their configuration. Banks are the way a system addresses memory. A bank must be completely filled with memory modules of the same size and type in order for the system to recognize and address the memory. i.e. :
3 (3 banks of 1) This indicates that there are 3 memory slots. These are divided into 3 banks, and each bank consists of one memory slot. So you can add memory one piece at a time for the system to use.
4 (2 banks of 2) This indicates that there are 4 memory slots. These are divided into 2 banks, and each bank consists of two memory slots. So you must add memory two pieces at a time (they must be the same size and type of memory) in order for the system to benefit from the upgrade.
2 Slot Vs 4 Slot Ram
Make sure if you have more than two slots the RAM is installed in slots of matching color – on a quad channel this is usually 1 & 3 or 2 & 4. If there is only one memory card and it is in the top slot, remove the top memory card before installing RAM in the bottom slot. Always install RAM in the slots from the bottom to the top. I can't for the life of me figure out whether to buy 2x16 GB RAM sticks or 4x8. I'm fairly certain I heard Wendell say in a recent youtube video that if you could get the same amount of RAM on 2 sticks, that would be preferable over 4 sticks. However, when I browse for which RAM to buy, I see that the 8 GB RAM sticks have better timings compared with 16 GB RAM sticks. So basically: would.
2 Slots Vs 4 Slots Ram Dass
12 (3 banks of 4) This indicates that there are 12 memory slots. These are divided into 3 banks, and each bank consists of four memory slots. So you must add memory four pieces at a time (and they must be the same size and type of memory) in order for the system to benefit from the upgrade.
Ram Slots 1 And 3
Re: Ideapad 330 15IKBU 81DEO11RIN: RAM Additional Upgrade 2 Slots?? 2019-11-12, 16:49 PM Well I upgraded my ram that was in the available slot which was a Samsung 4gb ddr4 2400mhz and it was working efficiently. And I got RAM question, shall I put the memory sticks in SLOT 1/3 or stay with my current setup 2/4? Intel Core i7-4790 3.6g 1150 Asus Maximus VII Hero Z97 DDR3 1600 CORSAIR VENGEANCE LP 16GB (2X8) 240PIN DDR3 1600 SAPPHIRE RADEAON R9 380 NITRO 4GB DDR5 CRUCIAL BX100 250GB SATA3 SEASONIC 860W PLATINUM ACTIVE PFC:). If it is DDR2 or DDR3 with 4 DIMM slots, then it will be a dual channel configuration, in which there will be no performance difference between having two slots filled vs all four filled, if only two are filled, it is the matter of if the motherboard supports the RAM sticks and the correct slots to fit them into.
